|
|
||
|
FEATURES:
Easy to replace slip-on shaft sleeve facilitates seal maintenance in the field and lowers long-term maintenance costs.
Pressure tappings on suction and discharge flanges promote easy verification of pump performance.
Rear pullout design allows pump to be serviced without disturbing the system piping.
Flush seal line tap allows installation of filter to protect seal from particles present in open systems.
Top center line discharge design simplifies piping layouts, reduces piping strain, and makes the pump self-venting.
Low-cost, replaceable wear rings protect casing during normal operation.
Standard ceramic seals promote product flexibility: enables basic product offering to meet a wide range of application requirements.
Cast iron casing with integrally cast feet enables pump to be bolted to base for sturdier installation and still allow back pull out without disturbing the piping.
DRY SHAFT DESIGN Ensures shaft is never exposed to the system fluid. |
Eliminates need for expensive corrosion-resistant shaft. Simplifies sleeve and seal removal/reassembly.
TACO RIGID BASE Steel construction provides for rigid base installation. Built-in drain pan collects all condensate and seal leakage. Ample open space for easy grouting. The heavy-duty compact design provides a more stable platform, which meets or exceeds hydraulic institute and industry standards for rigidity and vibration dampening, the base design is an ideal solution for those tight mechanical room installations. Facilitates improved alignment and ease of grouting. |
|
|
FEATURES: Easy to replace slip-on shaft sleeve facilitates seal maintenance in the field and lowers long-term maintenance costs.
Pressure tappings on suction and discharge flanges promote easy verification of pump performance.
Flush seal line tap allows installation of filter to protect seal from particles present in open systems.
Cast iron casing with integrally cast feet enables pump to be bolted to base for sturdier installation and still allow back pull out without disturbing the piping.
Top center line discharge design simplifies piping layouts, reduces piping strain, and makes the pump self-venting.
Rear pullout design allows pump to be serviced without disturbing the system piping. |
Low-cost, replaceable wear rings protect casing during normal operation. DRY SHAFT DESIGN Ensures shaft is never exposed to the system fluid.
Eliminates need for expensive corrosion-resistant shaft.
Simplifies sleeve and seal removal/reassembly. |
|
| "ks" vertical split coupled in-line pumps | ||
|
FEATURES:
designed for optimum performance and ease of installation and maintenance
ideal for HVAC and industrial applications, including pressure boosting, cooling towers, and domestic water service flows to 2500 GPM
Split coupler design permits changing of the seal without disturbing the motor or piping
Axial load is hydraulically balanced to increase bearing life and deliver better pump efficiencies and lower NPSH requirements
Recirculating line flushes seal faces and extends seal life, resulting in less downtime due to seal leaks
Optimum pump efficiency is achieved by close running impeller to casing clearances
Motor drive is isolated from the system with the split coupler design
Precision aluminum coupling |
High efficiency impellers standard on all sizes
Standard drilled and tapped mounting holes at base of casing
A seal flush line is standard on all models
Throttle bushing keeps contaminants away from the seal
Replaceable casing wear ring, pump support bracket, and external seal are all value added options |
|
| "kv" vertical inline pumps | ||
|
FEATURES:
Space saving design requires no isolation pads. simplified in-the-line design saves you time and money
Back pull-out design allows pumps to be pulled out from the back for service calls or maintenance, no need to disconnect from the piping system
Close coupled design for improved alignment and increased seal life means fewer service calls
Requires less time to install and requires no special tools or hardware |
Replaceable casing, wear ring, and pump support bracket are all value added options
Flows ranging up to 2500 GPM and heads up to 300' TDH |
|
|
FEATURES: Maximum operating pressure of 300 PSI.
Quick access for service and maintenance.
Low NPSH requirements and increased efficiency.
Compact arrangement increases seal and bearing life.
Heavy duty casing forgreater strength.
GPM thru 16,000 (Feb 2008)
No need to replace casing if wear rings require service. |
Maintenance is easy and fast.
High efficiency impeller. |
|
|
|
||
|
FEATURES:
Close coupled compact design is energy efficient and installs anywhere in the piping layout.
Rugged casing design has maximum operating pressure of 175 PSI and a maximum operating temperature of 300°F. The 1600 Series is offered in cast iron bronze-fitted construction or all-bronze construction.
Permanently lubricated, long-life bearing cartridge replaces conventional "wick" type bearing/bracket assembly. Single bearing cartridge services the entire product line.
One-piece enclosed impeller assures long life and higher pump efficiencies.
Resilient mounted motor ensures quiet, reliable pump operation. |
Standard mechanical seal assures maximum flexibility. One seal fits all models; several materials are available.
Flexible coupler design dampens system sounds and prevents misalignment forces from affecting pump casing and pump system.
One bearing cartridge, one seal, and two motor frames fit all pump models, assuring superior parts flexibility. |
|
|
FEATURES:
Close coupled compact design is energy efficient and installs anywhere in the piping layout.
Self-supporting design allows horizontal or vertical installation.
Pump and sealed ball bearing motor are maintenance-free.
Rear pull-out design and standard motor promote simple, easy service.
One seal and shaft sleeve fits all models, assuring superior parts flexibility. |
|
|
|
|
||
|
SERIES 110 – 120 FEATURES:
The Red Baron Circulators are backed by over 45 years of Taco experience in design and manufacture of standard circulators. Millions of 110s are in service — the 110 Red Baron is Taco’s most popular residential seal-type circulator. The Red Barons offer quiet, dependable pumping power and long-lasting performance. These dependable circulators are standard equipment on many OEM boilers. SERIES 121 – 138 FEATURES: In-Line Cartridge Design Pumps are backed by over 42 years of Taco experience in design and manufacture of circulators. Tens of thousands are in service. In-Line Cartridge Design Pumps offer quiet, dependable pumping power and long-lasting performance. Ideal for heating and/or air conditioning systems requiring high head performance with relatively low volume. |
SERIES 121 – 138 FEATURES (cont.): The Taco “Cartridge” pumps are the first in-line pumps to be specifically designed for hot water service. The unique cartridge design allow operation in systems up to 300°F. Bearing lubricant is isolated from the effects of the system fluid temperature. The Taco Cartridge pumps are the only in-line pumps having a centrifugal lubrication system. A dip stick is provided to check the oil level and a drain plug is provided to change the oil when necessary. |
|
|
FEATURES:
Compact, Space Saving Design Powerful Close-Coupled, Maintenance Free Motor Superior Efficiency, High Starting Torque Permanently Lubricated, Sealed for Life Bearings Precision Balanced Rotor for Quiet Operation Carbon/Silicon-Carbide Mechanical Seal for Long Life Universal Flange to Flange Dimensions - Ideal for Retrofits Anti-Condensate Design for Chilled Water |
Dual Electrical Knock-outs Dual Pressure Taps, Suction/Discharge Available in Cast Iron or Bronze |
|
